Are you struggling with the fire stick remote not working? And unable to find ways to rectify the same problem. Then here you will learn Why is my remote not working even with new batteries?
The Firestick and other devices use remotes, which are slightly distinct from most of the other remotes around your house. And to figure out, Why is my remote not working even with new batteries might be difficult. Encountering this issue is quite frustrating and to get access to your Firestick device, it is required to fix. If you are unable to do this on your own, then obey the following instructions to rectify the fire stick remote not working.
Why is the Fire Stick Remote Not Working?
Before implementing an efficient and adequate solution, it is required to get familiar with the causes of the issue. The following are some common causes for the same issue.
- The battery is inserted improperly.
- Obstruction between the remote and the device.
- Interfere with Bluetooth connections.
- Compatibility issue.
- The remote isn’t paired with a firestick.
- External damage.
Methods to Resolve Fire Stick Remote Not Working
Now you get to know Why is my remote not working even with new batteries? Now it is time to address the issue promptly.
Fixing the fire stick remote not working issue is not a complicated task, it is simpler than you think. Go through the below problem-solving solutions to rectify the same issue.
1. Restart the Firestick
If your remote is not working, then restart your Firestick device. Restarting will allow any update to be installed correctly.
And it also reduces the possibility of a software issue, which hinders the functioning of your remote properly. In this, you need to unplug your Firestick for a minute and plug it back.
Doing this will allow a power cycle to take place and also rectify some issues that may take effect.
2. Check the Status of your Remote
If restarting the device does not help you out, then you should check the status of your remote. Below are the instructions for how to check the status of your Firestick remote.
- Firstly, head over to the settings menu,
- Then click on “Control and Bluetooth Devices.”
- After this, check the status of your Firestick remote battery.
- If the firestick remote battery status is “OK”, then this indicates a software or interference issue is causing your issues.
- Firestick remote battery status shows offline when there are dead batteries, signal interference, and any software issue.
3. Check Whether the Remote is Paired or Not
Another thing you should do, to check if your Firestick remote is not working is, to ensure that it is paired to your device. Here is how to check whether the remote is paired or not.
- First, you need to restart your Firestick, by unplugging it for a minute.
- Then allow the device to boot into the main menu.
- After this, the remote will automatically get paired.
- Now on the remote, hold the home button for 20-25 seconds.
- And then see if the remote is responding.
- If it gets paired successfully, then you will get a successfully paired notification.
Sum up
Certainly, the above instruction will assist you with Why is my remote not working even with new batteries? Follow these problem-solving methods to fix the issue before seeking assistance from others. Also, make sure to obey the above problem-solving methods as given to rectify the fire stick remote not working.
0 Comments